Aleratec 350117 Manuel D’Utilisation

www.aleratec.com

16

Advanced Setup Menu: 7-1 Read Error Skip

This function can be enabled to ignore any error that occurs during copying. 

By default, the HDD Copy Dock Duplicator will halt the copy operation when 

it encounters an unreadable area of the source hard disk and display an error. 

Enabling this option will ignore any bad sectors on the source hard drive by 

skipping over them.  

Warning: Setting this function to “On” may result in corrupt data on copied hard 
drives. 

1.  Use the arrow buttons to scroll to “Advanced Setup”. The following 

screen will be displayed:

2.  Use the arrow buttons to scroll to “Read Error Skip”. The following screen 

will be displayed: 

3.  Press ENT to display the current configuration setting. The default setting 

is “Off”. 

Press the arrow buttons to toggle the option to “Disable” or “Enable”.

After changing a setting, remember to press ENT to save it.

 

 

Note: This setting will only apply for the current job. If desired, it will need to 
be set again for subsequent jobs.