Aleratec 310108 Manuel D’Utilisation
www.aleratec.com
12
Using the DVD/CD Flash Copy Tower
Disc Spanning
To use Disc Spanning go to Setup and enable Disc Spanning. When you want to copy
a Memory Card which has a content size bigger than a disc, the DVD/CD Flash Copy
Tower will automatically estimate the number of blank discs required for the job and
execute Disc Spanning. When the file size is very close to the writable space on the
blank discs, the DVD/CD Flash Copy Tower may under estimate the number of discs
needed. If this happens you can add an extra disc before you start or when the DVD/
CD Flash Copy Tower displays “Waiting Disc”. For example, when you copy an SD
Card with over 2GB content size to CDs, you place a CD into the burner, and the DVD/
CD Flash Copy Tower will calculate total number of discs to back up this SD Card (4
discs for this example, see Setup → Advanced Setup → DVD/CD/Spare Size on page 24
of this User Guide for seting writable space on DVD/CD). If you place a DVD (4.7G)
to copy, the DVD/CD Flash Copy Tower will start copying without requiring additional
discs.
Using Disc Spanning
1. Plug a Memory Card (ex. SD) and place a blank DVD or CD disc into the burner.
2. Select 1. Copy, → Select 1. M-Card to Disc → Press OK → The DVD/CD Flash
2. Select 1. Copy, → Select 1. M-Card to Disc → Press OK → The DVD/CD Flash
Copy Tower will begin copying.
Example: A total of 4 CD-R discs are required to complete this project
When a disc is finished copying, it will be ejected. If the Disc Spanning process is
not complete, the DVD/CD Flash Copy Tower will prompt you for a new blank disc
to continue the copying.
Note: The DVD/CD Flash Copy Tower can not use Disc Spanning for a
Memory Card that has a single file whose content size is bigger than a
disc size.
disc size.
Total = 135
Waiting disc...
Number of files on SD Card
Write D1/4
530 M
Total 2043MB
80M
First Disc
Current disc size
Copying progress
Total size to be copied