AMCC 720-0138-00 Manuel D’Utilisation

Maintenance page

101

 Number of drives in the unit.

 Type of unit: RAID 0, RAID 1, RAID 5, RAID 10, Single Disk, 

or Spare. If the unit has been given a unique name, it shows beneath the RAID 
type.

 User-assigned unique name of the unit. The default setting is 

blank.

 The usable capacity (size) of the unit. 

 Operational status of the unit: Ok, Rebuilding, Initializing, Verifying, 

Migrating, Degraded, or Inoperable (missing drives). When Rebuilding, 
Initializing, Migrating, or Verifying, the percentage (%) complete is also 
shown. The percentage complete can be active or paused. To see whether this 
task is currently active or paused, click on the unit number to display the Unit 
Details page, which has that information. For an explanation of the statuses, 
see “Unit Statuses” on page 63.

 The port to which the drive is connected. 

 The model of the drive.

 The capacity (size) of the drive.

. The status of the drive: OK, Not Supported, Not Present, and so forth. 

If you need help regarding a status displayed here, please contact Technical 
Support. For more information, see “Drive Statuses” on page 64.

 The 

 link removes a drive from the controller 

so that you can safely unplug it. In the Unit Maintenance section, this link is 
only provided for drives that can be safely removed without creating an 
inoperable unit. (For example, a RAID 5 missing 2 or more drives or a RAID 
0 missing 1 or more drives would become inoperable.) If you remove a drive 
from a redundant unit, the unit will become degraded. Once a unit has become 
degraded, additional drives cannot be removed without making it inoperable, 
so no 

 link will display. 

Below the list of units, a row of task buttons lets you perform maintenance 
and configuration tasks related to the unit. Before clicking one of these 
buttons, select the appropriate unit.