APC AP7900 Manuel D’Utilisation
®
USER’S GUIDE
Switched Rack PDU
30
Selecting a menu to perform a task
• To do the following, see
:
– Configure the overload and low load thresholds for each phase or
bank.
– Configure the
Overload Outlet Restriction
for each phase or bank.
– Set the
Name
,
Location
, and
Coldstart Delay
for the Rack PDU.
• To do the following, see
:
– Apply power to and remove power from the outlets.
– Set
– Set
Power On Delay
,
Power Off Delay,
and
Reboot Duration
for
the outlets.
– Set the names and associated links for the outlets.
– Create, enable, and use synchronized outlet groups.
– Create, enable, and use synchronized outlet groups.
• To do the following, see
– Access the event log.
– Configure the actions to be taken based on the severity level of an
– Configure the actions to be taken based on the severity level of an
event.
– Configure
SNMP Trap Receiver
settings for sending event-based
traps.
– Define who will receive e-mail notifications and Syslog messages for
events.
– Test e-mail settings.
• To do the following, see
– Access the data log.
– Define the log interval (how often data will be sampled and
– Define the log interval (how often data will be sampled and
recorded) for the data log.