APC AP7900 Manuel D’Utilisation
®
USER’S GUIDE
Switched Rack PDU
37
How to enable outlet groups
From the
Outlets
menu in the Web interface, select
Outlet Groups
,
configure the following parameters, and click
Apply
.
Enable creation of outlet groups.
Enable support for global outlet groups (linked groups).
How to create a local outlet group (Web interface)
1. From the
Outlets
menu in the Web interface, select
Outlet Groups
.
2. Make sure outlet groups are enabled.
3. Click
Create Local Outlet Group
.
4. Under
Configure Local Outlet Group
, select each outlet that will be in
the group. You must select at least two outlets.
Parameter
Description
Device Level Outlet Group
To create an outlet group, you must enable this
parameter. It is disabled by default.
parameter. It is disabled by default.
Parameter
Description
Multicast Name
To link outlet groups on multiple Switched Rack PDUs, you must
define the same Multicast name and Multicast IP address on each
of those Rack PDUs.
define the same Multicast name and Multicast IP address on each
of those Rack PDUs.
N
OTE
:
A Maximum of four devices can be configured with the
same Multicast name and Multicast IP address.
Multicast IP
See