Fujitsu A17-2 Manuel D’Utilisation

 

 

12 

A26361-K1063-Z121-1-7619, edition 1 

The monitor offers the following possibilities that enable it to be optimally adjusted for the respective 
user and the respective situation. 

The rake of the monitor can be adjusted by -5° (forward) and +20° (back) from its vertical position. 
► 

Grasp the monitor with both hands on the right and left edge of the casing and adjust it to the 
desired rake. 

 

 

1 =  Buttons for the OSD menu 

(On-Screen-display) 

2 =  ON/OFF switch 
3 =  Power indicator 

 

The ON/OFF switch (2) is used for switching the monitor on and off. 
The power indicator (1) lights up blue when the monitor and computer are switched on. The power 
indicator lights up orange when the monitor does not receive a video signal or is in the energy saving 
mode. The power indicator goes off when the monitor is switched off. 
When you switch the computer system on, you must proceed in the following order: 
► 

First switch on the LCD monitor with the ON/OFF switch (2). 

► 

Then switch on the computer. 

 

 

If your computer has a power management function (energy-saving mode), you should 
read the "Notes on power management" section in this chapter.