Fujitsu A17-2 Manuel D’Utilisation

 

 

20 

A26361-K1063-Z121-1-7619, edition 1 

Should an error occur, first check the following points. If the distortion is still not eliminated, the 
monitor should, if possible, be checked on another computer. 
If you are unable to solve the problem, please inform our help desk. 

No screen display 
(power indicator does not light) 

► 

Check whether the monitor is switched on. 

► 

Check whether the power cable on the monitor is 
connected correctly. 

► 

Check whether the computer is switched on. 

No screen display 
(power indicator lights) 

► 

Check whether the computer is switched on. 

► 

Check whether the data cable for the monitor is 
correctly attached to the monitor port on the 
computer. 

► 

Press any key on the computer keyboard - the 
computer may be in energy saving mode. 

► 

Alter the brightness and/or contrast until you get a 
picture. 

Message: 

Check Signal Cable 

► 

Check whether the data cable for the monitor is 
correctly attached to the monitor port on the 
computer. 

► 

Check whether the computer is switched on. 

Message: 

Out of Frequency 
Please change the display mode 

to 1280x1024 with 60 Hz. 

The input signal (horizontal frequency and refresh rate) at 
the displayed input does not correspond to the technical 
monitor data. 
► 

Adjust the video frequency range using the 
computer software (see documentation for your 
computer or your graphics card). 

Picture position is not correct 

The monitor recognises an undefined mode (see 
"Technical data"). 
► 

Press the AUTO button to conduct the auto-
adjustment of the screen. 

► 

Set the picture position with the OSD menu (see 
"Operation of the monitor").