Fujitsu A17-2 Manuel D’Utilisation
A26361-K1063-Z121-1-7619, edition 1
1
Introduction
Your new LCD (Liquid Crystal Display) monitor offers numerous features and functions, for example:
●
●
TFT display (Thin Film Transistor; active matrix)
●
minimal space requirements thanks to slim casing
●
optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour
purity right into the corners)
purity right into the corners)
●
high degree of brightness and good contrast
●
presentation of up to 16.2 million colours (in conjunction with an appropriate graphics card)
●
automatic scanning of horizontal frequencies from 31 to 81 kHz and refresh rates (vertical
frequencies) from 56 to 75 Hz (absolutely flicker-free)
frequencies) from 56 to 75 Hz (absolutely flicker-free)
●
digital screen controller with microprocessor for storing 18 different display modes
●
freely adjustable colour alignment for matching the screen colours to the colours of various
input and output devices
input and output devices
●
convenient operation via integrated OSD (On-Screen-display) menu
● VESA-DDC
compatibility
●
VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Interface) - mechanical
interface to swivel arm and wall bracket)
interface to swivel arm and wall bracket)
● plug&play
capability
●
power management for reducing power consumption when the computer is not in use
●
compliance with the recommendations in accordance with TCO’03
In normal screen mode (dark characters against a light background) the monitor satisfies the
ergonomic requirements for the GS symbol.
This operating manual contains important information you require to start up and run your LCD
monitor.
A screen controller with VGA interface is required to control the SCENICVIEW A17-2 / A19-1 / A17-2
DVI / A19-1 DVI / RE17-1 DE / RE19-1 DELCD monitor. The monitor processes the data supplied to
it by the screen controller. The screen controller/the associated driver software is responsible for
setting the modes (resolution and refresh rate).
When putting the monitor into operation for the first time, the screen display should be optimally
adapted to the screen controller used and adjusted in accordance with your needs (see Changing
the monitor settings.
ergonomic requirements for the GS symbol.
This operating manual contains important information you require to start up and run your LCD
monitor.
A screen controller with VGA interface is required to control the SCENICVIEW A17-2 / A19-1 / A17-2
DVI / A19-1 DVI / RE17-1 DE / RE19-1 DELCD monitor. The monitor processes the data supplied to
it by the screen controller. The screen controller/the associated driver software is responsible for
setting the modes (resolution and refresh rate).
When putting the monitor into operation for the first time, the screen display should be optimally
adapted to the screen controller used and adjusted in accordance with your needs (see Changing
the monitor settings.
Target group
You don't need to be an "expert" to perform the operations described here. Do, however, read the
"Important notes" chapter in the operating manual of the computer and in this operating manual.
In the event of any problems occurring, please contact your sales outlet or our help desk.
You don't need to be an "expert" to perform the operations described here. Do, however, read the
"Important notes" chapter in the operating manual of the computer and in this operating manual.
In the event of any problems occurring, please contact your sales outlet or our help desk.
Additional information
Details of how you set the resolution and refresh rate are provided in the documentation on your
screen controller/the associated driver software.
Details of how you set the resolution and refresh rate are provided in the documentation on your
screen controller/the associated driver software.