Nvidia GeForce Series Manuel D’Utilisation

User Manual 

4 

Please follow to the steps below to install your new display card. 

 If your motherboard has any on-board VGA function or there are other 

VGA devices installed in your system, you may have to remove or disable them 
before installing your new display card. 

1. 

Shut down the computer and remove 
the case cover. 

2. 

Remove any existing graphics card. 

3.  Remove the blanking plate from the 

PCI-Express or AGP slot 

 

4.  Press the PCI-Express 16X interface 

card firmly into the PCI-Express slot, 
making sure it is properly seated. (If 
your new display card is AGP interface, 
press it firmly into the AGP slot.) 

 

5. 

Secure the card in place with a screw. 

6. 

Replace the computer case cover. 

 If provided with one or two spare 

power supply cable(s), plug the power 
supply cable(s) in to provide supplementary 
power to the card. If supplementary power is 
not provided, there may be a drop in the 
card's performance. 

 

7. 

Connect a monitor to the newly installed card and ensure that it is 
correctly configured. 

8. 

Turn on the computer and install the driver (Please refer to the Software 
Installation in this manual).