Nvidia 2 Manuel D’Utilisation
16
Restoring an Unstable Display
If your display becomes unstable and you want to restore it to its original
confi guration, do one or more of the following:
confi guration, do one or more of the following:
Click Restore Defaults and then click Apply.
Disconnect the external house sync.
Viewing the Connection Status
See the section Checking the Connection Status (page 24).
How To Set Up Frame
Lock
The following are the basic steps to frame locking several systems. Detailed
instructions are provided in the section Set Up the Hardware (page 17).
instructions are provided in the section Set Up the Hardware (page 17).
Set Up the Hardware
Connect all the systems together using standard CAT5 patch cabling.
Note:
WARNING! The voltage and signal on the frame lock ports are different from
Ethernet signals. Do not connect a Frame lock port to an Ethernet card
or network hub. Doing so can cause damage to the hardware.
Set Up the Server Software
Use the NVIDIA Control Panel Synchronize Displays page to
establish the system as the server.
establish the system as the server.
Set Up the Client Software
Use the NVIDIA Control Panel Synchronize Displays page for each
client to enable frame lock on that system and to add an optional delay
to the sync pulse before transmitting to other clients.
client to enable frame lock on that system and to add an optional delay
to the sync pulse before transmitting to other clients.
NVIDIA Quadro G-Sync II User Guide