Nvidia 680i Manuel D’Utilisation

• System Monitor

Use this menu to monitor the real-time system status of your PC, including
temperature, voltages, and fan speed.

The following items on the CMOS Setup Utility main menu are commands rather 
than submenus:

• Load Defaults

Load default system settings.

• Set Password

Use this command to set, change, and disable the password used to access the
BIOS menu.

• Save & Exit Setup

Use this command to save settings to CMOS and exit setup.

• Exit Without Saving

Use this command to abandon all setting changes and exit setup.

The following item on the CMOS Setup Utility main menu is a status indicator:

• SLI-Ready Memory (Status indication at bottom of screen)

This status indicator is displayed at the bottom of the BIOS screen and consists of the
following remarks:

➢

Enabled: SLI-Ready memory is detected and enabled.

➢

Disabled: SLI-Ready memory is detected but disabled.

➢

Not Detected: SLI-Ready memory is not detected.

Installing and Configuring the BFG NVIDIA nForce 680i LT SLI Motherboard