Nvidia ST380023AS Manuel D’Utilisation

Release Note 

 
This document has been modified from the original Nvidia Media Shield User’s Guide. 
Some of the Nvidia screen captures may be different than your system. 
 
Please Note: In order to access the RAID utility, press F10 repeatedly once the boot 
screen appears.  
 
Press Ctrl-X to exit the RAID utility, it will automatically save any changes. 
There is not an option to exit without saving changes. 
 
Windows Vista sees the RAID as a single logical drive, but it does not “color code” it as 
a RAID storage solution in Administrative Tools.  The RAID logical drive is color coded 
the same as a single physical drive. 
 
The RAID utility does not auto-rebuild a defective or replacement RAID HDD.  The 
rebuild process must be initiated in the RAID utility.  The rebuild process may take 
several hours depending on the size of the drives. 
 
Here are some additional RAID definitions that may prove useful when configuring the 
RAID array. 
 
Striping = RAID 0 
Mirroring = RAID 1 
Stripe Mirroring = RAID 0+1 
RAID 5 = RAID 5 
Spanning = JBOD