Nvidia TNT2 Manuel D’Utilisation

Troubleshooting

System Hangs, Blank Screen 
or Corrupted Display

$IWHULQVWDOOLQJ*UDSKLFV%ODVWHU5,9$7179DOXHDQGVWDUWLQJ\RXUV\VWHPWKH

PRQLWRUGLVSOD\VDEODQNVFUHHQ
Solutions

Try the following:
❑ Switch off your system and wait a while before switching it on again.
❑ Verify that any built-in VGA on your motherboard is disabled and that you 

have removed any other video display card from your system.

❑ Ensure that your Graphics Blaster RIVA TNT2 Value card’s bus connector is 

fully inserted into the expansion slot.  Ensure this by pressing it gently and 
evenly into the slot.

❑ Verify that the pins of your monitor’s VGA Input connector are not bent and 

that the connector is properly connected to the VGA Out connector of 
Graphics Blaster RIVA TNT2 Value.

Windows 98 Multi-Monitor 
Display Problems

7KHPRQLWRUFRQQHFWHGWRWKHVHFRQGRUVXFFHVVLYH*UDSKLFV%ODVWHU5,9$717

9DOXHFDUGUHPDLQVEODQNHYHQWKRXJKWKHFDUGDQGLWVGULYHUVKDYHEHHQLQVWDOOHG
Cause

If Graphics Blaster RIVA TNT2 Value’s drivers are not specified during the 
software installation (see “To install in Windows 98” on page 8), the system 
installs the second or successive Graphics Blaster RIVA TNT2 Value card as a 
VGA card which does not support Windows 98’s multi-monitor feature.

Update the device drivers to Graphics Blaster RIVA TNT2 Value’s drivers:

1. Right-click your desktop, and then click Properties on the shortcut menu.

2. In the Display Properties dialog box, click the Settings tab.

3. On the Settings tabbed page, click the Advanced Properties button.

4. In the Advanced Display Properties dialog box, click the Change button.

5. In the Select Device dialog box, click the Have Disk button.

GB_M64.fm  Page 20  Monday, May 31, 1999  10:42 AM