Soyo SY-K7ADA Manuel D’Utilisation

This Motherboard does not use any hardware jumpers to set the CPU

frequency. Instead, CPU settings are software configurable with the BIOS

[SOYO COMBO SETUP]. The [SOYO COMBO SETUP] menu

combines the main parameters that you need to configure, all in one menu,

for a quick setup in BIOS.

After the hardware installation is complete, turn the power switch on, then

press the <DEL> key during the system diagnostic checks to enter the

Award BIOS Setup program. The CMOS SETUP UTILITY will display

on screen. Follow these steps to configure the CPU settings.

Select [STANDARD CMOS SETUP]

Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to

“Auto”.

Select [LOAD SETUP DEFAULT]

Select the “LOAD SETUP DEFAULT” menu and type “Y” at the prompt

to load the BIOS optimal setup.

Select [SAVE & EXIT SETUP]

Press <Enter> to save the new configuration to the CMOS memory, and

continue the boot sequence.