Black Box VSC-VPLEX4 Manuel D’Utilisation

Page de 28
724-746-5500   |   blackbox.com 
Page 20
724-746-5500   |   blackbox.com 
Chapter 6: VideoPlex4 Control Application
The main control dialog is divided into the following groups:
• Connection Diagram
• DVI-D Input
• Input Capture Regions
• Device
• Monitor Outputs
6.3 Connection Diagram
The connection diagram displays a schematic view of the rear panel of the VideoPlex4 to assist in identifying the connectors.
Figure 6-2. Back of unit.
6.4 Device
The unique USB device name that is connected is displayed in the Device group. You can associate a more user-friendly name 
such as “First Four Outputs.” The friendly name is stored in non-volatile storage on the VideoPlex4 and can to help identify the 
device during future configurations. Specific devices connected to your PC can be selected using the ”Select Device” command 
on the File Menu. The VideoPlex4s will be listed by the USB device or by a previously configured friendly name.
6.5 DVI-D Input
The DVI-D Input group displays the current DVI mode that is being captured (if any) and the preferred mode that has been  
programmed into the VideoPlex4’s EDID. Use the Modify button to update the EDID. The small square to the left of the current 
input resolution indicates whether the VideoPlex4 has frame-locked to the input source.
• Green – The outputs are frame-locked to the input dot clock and vertical sync.
• Grey – The outputs are not frame-locked.
Figure 6-3. DVI-D input screen.