Black Box LEH906A-2SFP Manuel D’Utilisation

724-746-5500   |   blackbox.com 

Page 130

Chapter 7: Command-Line Management

7.6 Trunking

Port Trunking, LACP Trunking

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

fe1 means port 1.

The switch_a(config-if)# prompt will show on the screen.

switch_a(config)#interface fe1

switch_a(config-if)#

2. Usage:

Use static-channel-group command to create a static aggregator, or add a member port to an already-existing static aggregator.

Use the no static-channel-group command to detach the port from the static aggregator.

3. Command Syntax:

static-channel-group <1-8>

no static-channel-group

<1-8> Channel group number.

 Maximum 8 ports in static-channel-group 1 to 6.

Maximum 4 ports in static-channel-group 7 and 8.

4. Example:

The following example adding the interface fe1 (port 1) to static-channel-group 1:

switch_a(config)#interface fe1

switch_a(config-if)#static-channel-group 1

switch_a(config-if)#

Static Channel Group:

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

fe1 means port 1.

The switch_a(config-if)# prompt will show on the screen.

switch_a(config)#interface fe1

switch_a(config-if)#