Black Box LEH906A-2SFP Manuel D’Utilisation

724-746-5500   |   blackbox.com 

Page 42

Chapter 6: Web-Based Browser Management

3.  In the “Add MAC Address” text entry box for each port, enter the MAC address of the device that you want to allow access to 

on this port. You can configure up to 24 MAC address for each port. 

Click on the “Update Setting” button to activate the new configuration

6.6 Switching

Figure 6-26.

Bridging

1. Aging Time (seconds): Click the text box and type a decimal number as Bridging Aging Time in seconds.

2. Update Setting: Click on the “Update Setting” button when you finish configuring Aging Time.

3.  Threshold Level (0.1–100): Click in the “Level” text box and type a decimal number for the port. You need to choose 

“Broadcast” and/or “DFL-Multicast“ “Storm-control enabled type” for the port. DLF (Destination Lookup Failure).

4. Storm Control Enabled Type: Choose “Broadcast” and/or “DLF-Multicast” from “Storm-control enabled type” for the port.

5.  Port Isolation: Choose “Enable” or “Disable” from the “Port Isolation” drop-down list to enable or disable port isolation for the 

port.

6.  Update Setting: Click “Update Setting” button when you finish Threshold Level, Storm Control Enabled Type, and Port Isolation 

settings.