Black Box LEH906A-2SFP Manuel D’Utilisation
724-746-5500 | blackbox.com
Page 80
Chapter 6: Web-Based Browser Management
6.14 Other Protocols
Figure 6-71.
GVRP
GVRP Global Setting:
1. GVRP: From the“GVRP” drop-down list, choose “Enable” or “Disable” to enable or disable GVRP (GARP VLAN Registration
Protocol).
2. Dynamic VLAN Creation: From the “Dynamic VLAN Creation” drop-down list, choose “Enable” or “Disable” to enable or
disable Dynamic VLAN Creation. GARP (Generic Attribute Registration Protocol) provides IEEE802.1Q compliant VLAN pruning
and dynamic VLAN creation on IEEE802.1Q trunk ports.
and dynamic VLAN creation on IEEE802.1Q trunk ports.
3. Update Setting: Click on the “Update Setting” button when you finish GVRP Global Setting.
Per Port Setting (include LAG):
1. GVRP: From the “GVRP” drop-down list, choose “Enable” or “Disable” to enable or disable GVRP for the port.
2. GVRP Applicant: From the “GVRP Applicant” drop-down list, choose “Active” or “Normal” to the port. Ports in the GVRP
active applicant state send GVRP VLAN declarations when they are in the STP (Spanning Tree Protocol) blocking state, which
prevents the STP bridge protocol data units (BPDUs) from being pruned from the other port. Ports in the GVRP normal
applicant state do not declare GVRP VLANs when in the STP blocking state.
prevents the STP bridge protocol data units (BPDUs) from being pruned from the other port. Ports in the GVRP normal
applicant state do not declare GVRP VLANs when in the STP blocking state.