Black Box LGB2118A Manuel D’Utilisation
724-746-5500 | blackbox.com
Page 56
Chapter 5: Operation of Web-based Management
5.2.7 IGMP Snooping
Function name: IGMP Snooping Configuration
Function description: IGMP Snooping lets administrators configure a switch to constrain multicast traffic by listening to Internet
Group Management Protocol (IGMP). After finishing the settings, click on the “Apply” button to start up the function.
Group Management Protocol (IGMP). After finishing the settings, click on the “Apply” button to start up the function.
Figure 5-14. IGMP Configuration.
Parameter description:
IGMP Enabled: Just tick the check box to enable this function. The default is disable.
Router Ports: Just tick the check box beside Port x to enable router ports, then press the “Apply” button to start up. The default is
none.
none.
Unregistered IGMP Flooding enabled: Just tick the check box to enable this function. The default is enable.
VLAN ID: When IGMP Enable mode is selected, it will list the VLAN ID number.
IGMP Snooping Enabled: After the IGMP Enabled function starts up, tick the check box to enable this function. The default is
enable.
enable.
IGMP Querying Enabled: After IGMP Enabled function starts up, tick the check box to enable this function. The default is enable.
5.2.8 Mirroring Configuration
Function name: Mirror Configuration
Function description: Mirror Configuration enables the switch to monitor the traffic in the network. This switch supports one-port
mirroring multi-ports. For example, if Port A and Port B are Source Ports, and Port C is Mirror Port, the traffic passing through
Port A and Port B will be copied to Port C for monitoring.
mirroring multi-ports. For example, if Port A and Port B are Source Ports, and Port C is Mirror Port, the traffic passing through
Port A and Port B will be copied to Port C for monitoring.
Parameter description:
Source Port: Set up the port you want to monitor. Just tick the check box beside Port x. Valid ports are Port 1–10.
Mirror Port: Use the drop-down menu to select a mirror port.