Black Box 5250 Manuel D’Utilisation

8. Now you can replace the PC’s cover, reattach all cables, and power up

any other peripheral you like.

Now install software for the 5250 Remote Emulator Card from the software
diskette included with the Card. (If you are using Microsoft

®

Windows™,

refer to Sections 5.2 and 7.2 for more information.)

1. If you’re going to keep the Card’s software on diskette, first make a

backup copy of the original diskette and store the original. Then put
the backup diskette into your computer diskette drive, switch to that
drive’s directory, and go to Step 8. If you’re going to keep the Card’s
software on your hard drive, go to Step 2.

2. At the DOS prompt, go to the hard drive’s root directory by typing the

hard-drive letter followed by a colon and [ENTER] (“c: [ENTER]”,
for example).

3. Create a directory at the DOS prompt by typing

4. Insert the 5250 Remote Emulator Card’s software diskette into the

computer’s diskette drive.

5. Assuming the diskette drive is drive a:, copy the software to the new

directory on the hard drive by typing

6. Remove the diskette and put it away.

7. Change to the emulation directory by typing

8. Run the configuration program by typing

9. The 5250 Remote Emulator Card’s software is preconfigured for a

standard setup. Select “Modify” and the Operating Environment setup
screen appears. You will be prompted to move the cursor to make a
selection from its menu. Make sure you choose the host configuration.
Refer to Chapter 6 for more information.

10.After selecting your configuration option(s), press [ESC] (the escape

key) until you return to the main menu. This prompt will appear: