Black Box 5250 Manuel D’Utilisation
71
5250 REMOTE EMULATOR CARD
1. Insert a paper tray of the proper size and press the printer’s RESET
button.
2. Power the printer OFF and back ON.
3. Release the print job at the host.
The System/38 uses a “Printer Support Facility” that sends the margins
and other document-form specifications to a printer only when these
are different from the previous document or when the printer has been
turned OFF. Either way, the LaserJet must be reset when a different paper
tray is installed.
and other document-form specifications to a printer only when these
are different from the previous document or when the printer has been
turned OFF. Either way, the LaserJet must be reset when a different paper
tray is installed.
The line-format screens in DisplayWrite/36 (Command 20) also permit
“Justify,” which aligns the right margin. “One-Half Justify” causes only
one-half as much alignment of the right margin. For best results in using
justification, change the zone width from “6” to “1.”
one-half as much alignment of the right margin. For best results in using
justification, change the zone width from “6” to “1.”
8.3.5 E
NVELOPE
P
RINTING
To print envelopes, specify typestyle number 5, landscape orientation, with
the first line of the address on line 30 and a left margin of 55. A trial run
with a blank sheet of paper will often help identify an error in positioning
the address.
the first line of the address on line 30 and a left margin of 55. A trial run
with a blank sheet of paper will often help identify an error in positioning
the address.
Manual Feed:
Select the “Envelope Feed” option in the word-processing
program’s paper-feed selections and a paper size of 11" x 11". The printer
will flash “Manual Feed” on the front-panel display window. Manually feed
the envelope into the printer.
will flash “Manual Feed” on the front-panel display window. Manually feed
the envelope into the printer.
Envelope Tray:
Select “Envelope Feed” and a paper size of 7.5" or 9.5"
(or 22 cm). The printer automatically finds the envelope tray (if this has
been installed) and prints the envelope.
been installed) and prints the envelope.
Envelope Feeder:
Select “Envelope Feed” and a paper width of 7.5"
o 9.5" (or 22 cm). The printer automatically finds the envelope feeder
(if this has been installed) and prints the envelope.
(if this has been installed) and prints the envelope.
NOTE
The LaserJet may eject a blank page when you change print orientation.
8.3.6 D
UPLEX
P
RINTING
Some LaserJet models can print both simplex (single sided) and duplex
(double sided); for that matter, they can print both long-edge (landscape)
and short-edge (portrait) duplex. However, changing the printer’s
simplex/ duplex mode through its front panel can be time consuming.
Instead, place printing commands on the first line of the document to
control simplex, landscape-duplex, and portrait-duplex printing. Enter one
(double sided); for that matter, they can print both long-edge (landscape)
and short-edge (portrait) duplex. However, changing the printer’s
simplex/ duplex mode through its front panel can be time consuming.
Instead, place printing commands on the first line of the document to
control simplex, landscape-duplex, and portrait-duplex printing. Enter one