Spectralink 1728 Manuel D’Utilisation
8
R
EFERENCE
& I
NSTALLATION
M
ANUAL
Figure 2.2: Spectra 1728EX and 1728 Control Panel Overview
2.2
EARTH GROUND
Connect the zone and dialer ground terminals from the control panel to the metallic enclosure and cold water pipe or
grounding rod as per local electrical codes.
grounding rod as per local electrical codes.
For maximum lightning protection, use separate earth grounds for the zone and dialer grounds as
shown in Figure 2.1 on page 7. For UL installations, the metallic enclosure must be grounded to the
cold water pipe.
shown in Figure 2.1 on page 7. For UL installations, the metallic enclosure must be grounded to the
cold water pipe.
For the keypad’s zone, EOL and
tamper configurations, refer to
Configuring The LED Keypads on
page 14.
tamper configurations, refer to
Configuring The LED Keypads on
page 14.