Manualsbrain.com
  1. Manuels
  2. Marques
  3. Tyan Computer
  4. B5103G12S2
  5. Manuel D’Utilisation

Tyan Computer B5103G12S2 Manuel D’Utilisation

Télécharger
Page de 87
20 
http://www.TYAN.com 
 
5.  Replace the cabinet cover. 
6.  You can create or rebuild RAID for the hard disk drive (see chapter 6 for 
information). 
2.2  Adding a CD Drive 
You will need to use a CD drive when installing an operating system and its 
corresponding drivers (see chapter 3). 
WARNING: You are advised not to make frequent connection and disconnection on the 
IDE connector as this might cause damage to the data cable and connector pins. 
 
CAUTION: Follow the instructions in this section carefully. The DVD or CD drive contains a 
laser device. Do not attempt to open the DVD or CD drive’s 
enclosure or remove a DVD or 
CD drive using any procedures other than those contained in this section to avoid the risk of 
exposure to harmful radiation. 
 
With a Secondary Ultra ATA/100 Hard Disk Drive Installed 
1.  Remove the cabinet cover (see the previous section in this chapter). 
2.  Unplug the data cable and power cord from the rear of the secondary hard disk 
drive. 
3.  Connect the unplugged data cable (Œ) and power cord (•) to the rear of the CD 
drive.