Tyan Computer B5103G12S2 Manuel D’Utilisation

http://www.TYAN.com 

3.1  Installation Instructions for Windows 

Windows Installation Notes 

Proceed with the normal Windows operating system installation but if you are installing 
Windows on to a Serial ATA hard disk drive with RAID function, do the following first: 

1.  Create a RAID driver floppy disk by inserting a blank floppy disk and the driver CD 

into the floppy drive and CD drive respectively, on another Windows system. 

2.  Run the iaar2_floppy.exe program in the \Intel_8xx\i8xx_UATA\ 

 directory. This will create the RAID driver floppy disk. 

3.  On your system, enter BIOS Setup and enable the RAID and SATA functions (see 

chapter 5 for details). 

4.  Connect a USB floppy drive to your system. 

5.  Press F6 and insert the floppy disk containing the Intel RAID driver into the USB 

floppy drive. 

6.  Specify the “Intel 82801ER SATA RAID Controller” to install. 

7.  Then, proceed with the Windows operating system installation. 

After installing the Windows operating system, proceed to the following driver 
installations. 

NOTE: An autorun program is provided on the driver CD to help you easily install the drivers. 
As you insert the CD, the autorun program automatically starts. Proceed to the following 
sections if you need to install the driver(s) manually. 

 

Chipset Driver 

1.  Insert the driver CD into the CD drive. 

2.  Run the infinst_autol.exe program in the \Intel_8xx\i8xx_INF\ 

 directory. 

3.  Follow the onscreen instructions to complete the installation. 

4.  When finished installing, choose the “Yes” option to reboot and click “Finish” to 

restart your system. The driver should now be loaded. 

VGA Driver 

NOTE: This driver supports Windows XP only. 

 

1. 

Insert the driver CD into the CD drive.