Tyan Computer B5103G12S2 Manuel D’Utilisation
48
http://www.TYAN.com
4.4 Setting the Configuration For FreeBSD
Press the corresponding button according to the number of times specified on the
following tables, and you will see the corresponding prompt.
following tables, and you will see the corresponding prompt.
NOTE: If you press the C (Cancel) button at any time to cancel the configuration, you
must go through the entry process for a particular setting again.
must go through the entry process for a particular setting again.
KEY PRESS
PROMPT
FUNCTION
Right arrow
Configure
Network
Network
Upon each succeeding press of the Right arrow, the
following prompt appears, allowing you to configure
the network:
NIC Choice
following prompt appears, allowing you to configure
the network:
NIC Choice
(default is First NIC)
Enable DHCP
(default is Yes)
IP Address
Netmask
Gateway
DNS Server
Using New Setting
Press S (Select) to accept.
Down arrow
once (1)
Restart
Upon pressing the Right arrow, the following prompt
appears, allowing you to restart the system:
Restart?
appears, allowing you to restart the system:
Restart?
Press S (Select) to restart the system.
Down arrow
twice (2)
Shut Down
Upon pressing the Right arrow, the following prompt
appears, allowing you to shutdown the system:
Shutdown?
appears, allowing you to shutdown the system:
Shutdown?
Press S (Select) to shutdown the system.
Down arrow
three (3) times
Reset Admin
Password
Password
Upon pressing the Right arrow, the following prompt
appears, allowing you to reset the root password:
Reset Password?
appears, allowing you to reset the root password:
Reset Password?
Press S (Select) to reset the password.
NOTE: The default root password is password.
NOTE: The default root password is password.
Down arrow
four (4) times
Enable SSH
Access
Access
Upon pressing the Right arrow, the following prompt
appears, allowing you to enable SSH access:
SSH Access On?
appears, allowing you to enable SSH access:
SSH Access On?
Press S (Select) to enable SSH access.