Intel D915GUX Manuel D’Utilisation
Intel Desktop Board D915GEV/D915GUX/D915GAV/D915GAG Product Guide
52
Setting the BIOS Configuration Jumper Block
CAUTION
Always turn off the power and unplug the power cord from the computer before changing the
jumper. Moving the jumper with the power on may result in unreliable computer operation.
jumper. Moving the jumper with the power on may result in unreliable computer operation.
Figure 28 shows the location of the desktop board’s BIOS configuration jumper.
OM16898
1
3
Figure 28. Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup.
Table 12 shows the jumper settings for the Setup program modes.
Table 12 shows the jumper settings for the Setup program modes.
Table 12. Jumper Settings for the BIOS Setup Program Modes
Jumper Setting
Mode
Description
3
1
Normal (default) (1-2)
The BIOS uses the current configuration and passwords for
booting.
booting.
3
1
Configure (2-3)
After the Power-On Self-Test (POST) runs, the BIOS
displays the Maintenance Menu. Use this menu to clear
passwords.
displays the Maintenance Menu. Use this menu to clear
passwords.
3
1
Recovery (None)
The BIOS recovers data from a recovery diskette in the
event of a failed BIOS update.
event of a failed BIOS update.