Intel E7520 Manuel D’Utilisation
Dual-Core Intel
®
Xeon
®
processor LV with Intel
®
E7520 Chipset and Intel
®
6300ESB ICH
April 2007
User’s Manual
Order Number: 311274-009
15
Dual-Core Intel Xeon processor LV / E7520 Chipset / 6300ESB ICH
Check jumper settings. Verify that the jumpers are set in their default state. Refer to
for detailed descriptions of all jumpers and their default settings indicated
in bold.
2.6.3
Installed Hardware
Verify installed hardware. Make sure the following hardware is populated on your
evaluation board:
• Two Dual-Core Intel Xeon processors LV with heatsinks
• BIOS FWH
• Battery in holder
• BIOS FWH
• Battery in holder
Note:
The CPU sockets have a screw locking mechanism. The socket has an indication to
show if the CPU is locked in place.
Caution:
The above hardware should have been correctly installed at the factory. If components
are not installed correctly, DO NOT power on the board. Correctly re-install the
components before proceeding. If you suspect that any of the kit components have
been damaged, contact your Intel field sales representative or local distributor for
assistance.
2.6.4
Installing the Heatsinks for CPU(s) and MCH
Heatsink Installation: In order for the board to operate properly, a heatsink must be
installed on the processors and on the E7520 MCH. DO NOT power on board without a
CPU thermal solution. Heatsinks may already come pre-installed on both CPU(s) and
MCH. Please refer to this section if you need to remove or re-install the heatsinks.
Tools Needed: Flat head screwdriver and Phillips head screwdriver
Consumable Items Needed: Disposable towels and isopropyl alcohol
Note:
CPU heatsinks may be silver or copper in color.
Table 3.
Heatsink Information
Component
Quantity Per
Board
Heatsink
Manufacturer
Part Number
Comments
Dual-Core Intel
®
Xeon
®
processor LV
2 Cooler
Master*
P/N
EEP-N41CS-I1-GP
Active heatsink +
back plate
E7520 MCH
1
Cooler Master
ECB-000208-01
Active heatsink