Seagate ST1000NM0031 Manuel D’Utilisation
C
ONSTELLATION
ES S
ERIAL
ATA P
RODUCT
M
ANUAL
, R
EV
. F
25
3.4
D
RIVE MOUNTING
You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See
Figure 6 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive:
• Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• The screws should be inserted no more than 0.150 in (3.81mm) into the bottom or side mounting holes.
Figure 6 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive:
• Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• The screws should be inserted no more than 0.150 in (3.81mm) into the bottom or side mounting holes.
•
Do not overtighten the mounting screws (maximum torque: 6 in-lb).
Weight: (maximum)
2TB models
1TB models
500GB models
710g (1.565 lb)
640g (1.411 lb)
610g (1.345 lb)
Note.
www.sffcommittee.org
Breather
Hole
mm
in
mm
in
mm
in
Figure 6.
Mounting dimensions—top, side and end view