Samsung 3.5" hard disk drives Manuel D’Utilisation

Page de 115
DESCRIPTION 
 
SpinPoint V40 Product Manual
 
4
CHAPTER 2  DESCRIPTION 
 
 
This chapter summarizes general functions and key features of
 
the
 
Spinpoint V40 drive, as well as the 
standards and regulations they meet. 
 
2.1 Introduction 
 
The Samsung SpinPoint V40 3.5 inch disk drives are high capacity, high performance random access storage 
devices, which use non-removable 3.5-inch disks as storage media. Each disk incorporates thin film metallic 
media technology for enhanced performance and reliability. And for each disk surface there is a 
corresponding movable head actuator assembly to randomly access the data tracks and write or read the user 
data. The formatted capacities of the SpinPoint V40 family are 20.0,30.06,40.0,60.0,60.06 and 80.0 gigabytes 
of storage.  Samsung defines a gigabyte (GB) as one billion bytes. 
 
The SpinPoint V40 drives include the AT controller embedded in the disk drive PCB electronics. The drive's 
electrical interface is compatible with all mandatory, optional and vendor-specific commands within the ATA 
specification. 
 
Drive size conforms to the industry standard 3.5-inch form factor. The interface connectors are the standard 
40-pin for AT Interface and 4-pin for DC power supplies. 
 
The SpinPoint V40 incorporates Advanced GMR (Giant Magneto Resistive) head and Noise Predictive 
PRML (Partial Response Maximum Likelihood) signal processing technologies. These advanced 
technologies allow for an areal density of over 29.18 gigabits per square inch and storage capacity of over 
40.06 gigabytes per disk. 
 
The heads, disk(s), and actuator housing are environmentally sealed within an aluminum-alloy base and 
cover. As the disks spin, air circulates within this base and cover, commonly referred to as the head and disk 
assembly (HDA), through a non-replaceable absolute filter ensuring a contamination free environment for the 
heads and disks throughout the life of the drive. 
 
2.2 Key 
Features 
 
Key features of the SpinPoint V40 hard disk drives include: 
 
  Formatted capacities are  20.0,30.06, 40.0, 60.0,60.06 and  80.0 Gbytes  
  Low-profile, 1-inch height form factor 
  8.9 msec average seek time 
  High accuracy rotary voice coil actuator with embedded sector servo 
  Ultra ATA33/66/100
 
 interface 
  ATA standard PIO Mode 4/DMA Mode 2/Ultra DMA Mode 4 & 5(UDMA 66/100)  support 
  Supports both CHS and LBA Addressing modes 
  Supports all logical geometries as programmed by the host