Renesas FP-80A Manuel D’Utilisation

Section 5   Notice 

1.  Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cable 

head before inserting the cable head into the user system IC socket. 

2.  The dimensions of the recommended mount pad for the user system IC socket are different 

from those of the MCU.   

3.  This user system interface cable is specifically designed for the HS3052EPI61H emulator.  Do 

not use this cable with any other emulator station.   

4.  To prevent breaking of wires in the cable body, do not place heavy or sharp metal objects on 

the user system interface cable. 

5.  While the emulator station is connected to the user system with the user system interface 

cable, force must not be applied to the cable head.  Place the emulator station, user system 
interface cable, and user system as shown in the example in figure 10. 

 

6.  The JP1 jumper is used for testing.  Do not remove the jumper pin that is inserted in the sides 

of pin 1 and pin 2. 

JP1

1

3

 

16