Fujitsu FR81S Manuel D’Utilisation
CHAPTER 22: 32-BIT OUTPUT COMPARE
4. Registers
FUJITSU SEMICONDUCTOR LIMITED
CHAPTER
: 32-BIT OUTPUT COMPARE
FUJITSU SEMICONDUCTOR CONFIDENTIAL
9
[bit9] OTD : Pin level setting (Output compare y)
[bit8] OTD : Pin level setting (Output compare x)
[bit8] OTD : Pin level setting (Output compare x)
This bit specifies the pin output level (initial value) when OCU pins output is allowed.
OTD
Operating
0
OCU pins output level (initial value) is set to "L".
1
OCU pins output level (initial value) is set to "H".
⋅
When OCU pins output is performed, the setting of a general-purpose port is required.
⋅
This bit can write the value for the comparison operation stop state (OCSL.CSTx or CSTy="0").
The setting should be performed after the compare operation is stopped.
⋅
With the reading operation, the output compare pin output is read.
MB91520 Series
MN705-00010-1v0-E
846