Fujitsu C122-E177-01EN Manuel D’Utilisation
MMB Web-UI (Web User Interface) Operations
Items
Description
EFI: The UEFI menu screen is displayed.
Boot: Operating system is being booted.
Operating system Running: Operating system running state
Operating system Shutdown: Operating system shutting down.
Panic: Panic (Only in RHEL)
Power Off In Progress: Partition power off is in process.
Fatal: Stopped.
Dumping: The dumping is being output.
Halt: Halting.
Stop Error: Stop error. (Only in Windows)
Remarks
When SVAS (Server View Agentless Service) is not installed to partition,
the display is not switched over in ‘Operating system Running’ even if
Operating system is working.
the display is not switched over in ‘Operating system Running’ even if
Operating system is working.
Moreover, for ‘Operating system shutdown’, ‘Panic’ commanded by
SVAS if SVAS is not installed, there is no display.
SVAS : Specifies the piece of software running on the OS in managed
nodes to help BMC with management. Unless SVAgent, it does not
provide management interface to the outside.
SVAS if SVAS is not installed, there is no display.
SVAS : Specifies the piece of software running on the OS in managed
nodes to help BMC with management. Unless SVAgent, it does not
provide management interface to the outside.
Power Control
Selects power control specified for the partition.
However, for the partition which is already in power-on state, [Power On] is not
displayed. On the contrary, for the partition which is already in powered off,
[Power Off], [Reset], [NMI], [Power Cycle], [Force Power Off] and [sadump] are
not displayed.
However, for the partition which is already in power-on state, [Power On] is not
displayed. On the contrary, for the partition which is already in powered off,
[Power Off], [Reset], [NMI], [Power Cycle], [Force Power Off] and [sadump] are
not displayed.
Power On: Partition is the powered on.
Power Off: Partition is powered off.
From the view point of Operating system, it is same as that the power
button of the device is on. Therefore, when the operating system
supports the ACPI, power can be turned off after the operating system is
shutdown. For details, see Power Specifications (ACPI) of the operating
system. When the operating system does not support the ACPI, the
power can be turned off without shutting down the operating system.
button of the device is on. Therefore, when the operating system
supports the ACPI, power can be turned off after the operating system is
shutdown. For details, see Power Specifications (ACPI) of the operating
system. When the operating system does not support the ACPI, the
power can be turned off without shutting down the operating system.
Power Cycle: Powered on again after the partition is forcibly powered on.
Reset: Resets the partition.
NMI: Produces the NMI interruption for the partition.
Force Power Off: Turns off the power forcefully.
sadump: Specifies the SADUMP for the partition.
(Not specified): There is no instruction for this partition.
Force Power Off Delay
Specifies whether to enforce power off, when power off is done without proper
operation of the shutdown instruction for the operating system by [Power Off]
on the partition. In case enforced power off has been specified, the specified
time (1~9 minutes) can be set. The partition is forcibly powered off when the
specified time has lapsed.
The default setting of check box is Off.
operation of the shutdown instruction for the operating system by [Power Off]
on the partition. In case enforced power off has been specified, the specified
time (1~9 minutes) can be set. The partition is forcibly powered off when the
specified time has lapsed.
The default setting of check box is Off.
Boot Selector
Specifies the boot device for which the Boot Manager setting of BIOS is
Override temporarily. Select the device to be boot from pull-down menu.
Override temporarily. Select the device to be boot from pull-down menu.
No Override: Boots by the EFI Boot Manager settings.
Force boot into EFI Boot Manager: Waiting for input by the EFI Boot
Manager. Boot by selecting the boot device from the EFI Boot Manager
Manager. Boot by selecting the boot device from the EFI Boot Manager
Force PXE/iSCSI: Overrides the EFI Boot Manager settings, forcibly tries
the PXE.
the PXE.
Force boot from DVD: Overrides the EFI Boot Manager settings, and
forcibly tries the booting from the System DVD.
forcibly tries the booting from the System DVD.