Fujitsu C122-E177-01EN Manuel D’Utilisation
MMB Web-UI (Web User Interface) Operations
TABLE 1.67 [IPv6 Console redirection Setup] Window Buttons
Buttons
Description
Auto
When you Click [Auto] button IP address and prefix length is automatically displayed.
Apply
When you click the [Apply] button, video direction of the specified partition, virtual media setting
is applied.
is applied.
Cancel
When you click the [Cancel] button, virtual media setting, video redirection is not applied and it
returns to the original state.
returns to the original state.
(1) Menu Operation
[Partition] - [Console Redirection Setup] - [IPv6 Console Redirection Setup]
(2) Window Operations
1.
Input the IP address, prefix length and sets whether video redirection and virtual media should be used.
2.
Click the [Apply] button.
[Message]
This section describes the messages to be displayed on this window.
Message Number
Message
W_00432
Invalid IP Address specified
W_00433
The duplicate IP address was found.
I_00539
The settings for the Console Redirection IP are changed. All existing network
connections about this settings will be lost. You will need to login again. If you want to
continue, please click OK button. If not, click Cancel button. Are you sure?
connections about this settings will be lost. You will need to login again. If you want to
continue, please click OK button. If not, click Cancel button. Are you sure?
1.3.4 [Partition Configuration] Menu
The SB and IOU which configure the partition can be set on [Partition Configuration] window.
In case of PRIMEQUEST 2400E model, only 0 and 1 are displayed for partition.
In case of PRIMEQUEST 2400E model, only 0 and 1 are displayed for partition.