Fujitsu C122-E177-01EN Manuel D’Utilisation
MMB CLI (Command Line Interface) Operations
(3) Usage example
Example: In PRIMEQUEST 2800E, when SB#3 is to be added in Partition #2
#add partition 2 SB 3
Are you sure to continue adding SB#3 to Partition#2? [Y/N] Y
Adding SB#3 to Partition#2 has been completed successfully.
#
Are you sure to continue adding SB#3 to Partition#2? [Y/N] Y
Adding SB#3 to Partition#2 has been completed successfully.
#
Example: In PRIMEQUEST 2800E, when IOU#1 is to be added in Partition #2
#add partition 2 IOU 1
Are you sure to continue adding IOU#1 to Partition#2? [Y/N] Y
Adding IOU#1 to Partition#2 has been completed successfully.
#
Are you sure to continue adding IOU#1 to Partition#2? [Y/N] Y
Adding IOU#1 to Partition#2 has been completed successfully.
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
Are you sure you want to add %s to partition #%d? [Y/N]:
Adding %s to Partition#%d has been completed successfully.
The specified partition number is invalid.
Parameter missing
The specified parameter is invalid.
The parameter [IOU] is not supported.
Unable to add the specified SB#x to the partition due to CPU mismatch between SBs.
Unable to execute this command on a standby MMB.
Failed to execute add partition command.
Failed to execute %s command.
Unable to add the specified SB to the partition due to CPU composition abnormal.
Unable to add the specified SB to the partition due to DIMM composition abnormal.
Unable to add the specified SB to the partition due to SB composition abnormal.
Unable to add the specified SB to the partition due to VRM composition abnormal.
Unable to add the specified SB to the partition due to DIMM does not satisfy requirements of Mirror Mode.
The specified command is not supported.(error=[%s])
Unable to execute this command because the system is under maintenance.
Unable to execute this command because the Partition#x is under maintenance.
Unable to set configuration because the power on/off is processing.
Please execute it after a while again.
Adding %s to Partition#%d has been completed successfully.
The specified partition number is invalid.
Parameter missing
The specified parameter is invalid.
The parameter [IOU] is not supported.
Unable to add the specified SB#x to the partition due to CPU mismatch between SBs.
Unable to execute this command on a standby MMB.
Failed to execute add partition command.
Failed to execute %s command.
Unable to add the specified SB to the partition due to CPU composition abnormal.
Unable to add the specified SB to the partition due to DIMM composition abnormal.
Unable to add the specified SB to the partition due to SB composition abnormal.
Unable to add the specified SB to the partition due to VRM composition abnormal.
Unable to add the specified SB to the partition due to DIMM does not satisfy requirements of Mirror Mode.
The specified command is not supported.(error=[%s])
Unable to execute this command because the system is under maintenance.
Unable to execute this command because the Partition#x is under maintenance.
Unable to set configuration because the power on/off is processing.
Please execute it after a while again.
2.2.2 clear access_control
It clears the setting of Access Control.
Privilege: Administrator
(1) Input format
clear access_control
(2) Option
None
(3) Usage example
None
(4) Message
The following table lists the messages which are displayed in this CLI.