Fujitsu C122-E177-01EN Manuel D’Utilisation
MMB CLI (Command Line Interface) Operations
Set point of default is 0.0.0.0, common in ip address, netmask, gateway address, smtp address.
Sets virtual IP address of MMB connected in Serial.
Sets point of default is 0.0.0.0.
Sets virtual IP address of MMB connected in Serial.
Sets point of default is 0.0.0.0.
<ip address>: IP address set in Maintenance port (when 0.0.0.0 is specified, settings are cleared)
<subnet mask>: Subnet mask of IP address
<gateway address>: Gateway
<smtp address>: Mail server for REMCS notification
Remarks
When you change SMTP Address by this command, it is necessary to change the settings of SMTP
server in REMCS environment setting window. Moreover, before initializing REMCS, Routing should be
set by this command.
server in REMCS environment setting window. Moreover, before initializing REMCS, Routing should be
set by this command.
When REMCS is to be connected in P-P, <gateway address> and <SMTP address> are not required.
In such case, <gateway address> and <SMTP address> are set to 0.0.0.0.
In such case, <gateway address> and <SMTP address> are set to 0.0.0.0.
When settings in this command are invalid, <ip address> is set to 0.0.0.0. Though the parameters other
than <ip address> parameters are optional, they are recommended to be 0.0.0.0.
than <ip address> parameters are optional, they are recommended to be 0.0.0.0.
Privilege: Administrator, CE
(1) Input format
set maintenance_ip <ip address> <netmask> <gateway address> ¥
<smtp address>
<smtp address>
¥: Indicates that there is no new line.
(2) Option
None
(3) Usage example
Examples: Setting the IP address of the Maintenance port by the following contents
IP address: 192.168.1.10
Subnetmask: 255.255.255.0
Gateway: 192.168.1.1
Mail server for REMCS acknowledgement: 172.128.1.2
# set maintenance_ip 192.168.1.10 255.255.255.0 192.168.1.1 172.128.1.2
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified IP address is invalid.
The specified netmask is invalid.
The specified gateway address is invalid.
The specified smtp address is invalid.
Unable to execute this command on a standby MMB.
The specified netmask is invalid.
The specified gateway address is invalid.
The specified smtp address is invalid.
Unable to execute this command on a standby MMB.
2.2.25 set partition home
It sets the Home SB of the specified partition.
It specifies the number of SB to be set in Home. If the specified SB does not exist, the process is not
executed.
It specifies the number of SB to be set in Home. If the specified SB does not exist, the process is not
executed.