Fujitsu C122-E177-01EN Manuel D’Utilisation
MMB CLI (Command Line Interface) Operations
10.1.2.3
0x1
0x2
00:21:A1:1A:32:45
*
bond0
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified parameter is invalid.
(5) Process
Displays only bond 0 of cat/proc/net/arp (Control LAN).
2.3.34 netck arping
Displays the physical address (MAC address) of the Ethernet from the specified IP address.
Remarks
Support only IPv4.
Remarks
Support only IPv4.
Privilege: Aｌｌ
(1) Input format
netck arping <ip>
(2) Option
None
(3) Usage example
# netck arping 10.1.2.3
ARPING to 10.1.2.3 from 10.1.2.33 via bond0
Unicast reply from 10.1.2.3 [0:21:a1:1a:32:45] 1.253ms
Sent 1 probes (1 broadcast(s))
Received 1 reply
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
None
(3) Usage example
# netck arping 10.1.2.3
ARPING to 10.1.2.3 from 10.1.2.33 via bond0
Unicast reply from 10.1.2.3 [0:21:a1:1a:32:45] 1.253ms
Sent 1 probes (1 broadcast(s))
Received 1 reply
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified parameter is invalid.
(5) Process
Executes arping ‐l bond0 ‐c 1 <ip>
2.3.35 netck ifconfig
Displays the setting status of (IPv4 or IPv6) network environment.
Privilege: Aｌｌ
(1) Input format