Fujitsu C122-E177-01EN Manuel D’Utilisation
Setting of sadump environment
TABLE 6.4 Displayed contents of the help display area for operation
Item
Description
↑↓=Move Highlight
Moves the cursor up or down
<Enter>=Select Entry
Selects an entry.
In the case of ENABLE, COMPRESS, RECYCLE,
selection item is shown as pop-up window.
In the case of REBOOT, you can input a value.
Specify a value, and commit it by [Enter] key.
In the case of ENABLE, COMPRESS, RECYCLE,
selection item is shown as pop-up window.
In the case of REBOOT, you can input a value.
Specify a value, and commit it by [Enter] key.
Note
Don’t operate [F2] key. [Esc] key is displayed on the screen but don’t operate it.
6.4
[Dump device Manager] Menu
This is displayed when the [Dump device Manager] menu is selected in the main menu.
In this menu, you can create, setup, discard dump device.
In this menu, you can create, setup, discard dump device.
FIGURE 6.7 Dump device maintenance menu
TABLE 6.5 Displayed contents of menu selection area
Item
Description
Display area
Displays the number of dump devices which are
already created, and displays the number of dump
devices which are already set up.
already created, and displays the number of dump
devices which are already set up.
Create a dump device
Go to dump device create menu.
Select a dump device
Go to dump device setup menu.
Discard a dump device
Go to dump device discard menu.
Exit
Exits this menu