EVGA 123-YW-E175 Manuel D’Utilisation

nForce 750i SLI Motherboard

Before You Begin…

Parts NOT in the Kit

This kit contains all the hardware necessary to install and connect your new EVGA nForce

®

 750i SLI 

motherboard. However, it does not contain the following items that must be purchased separately to 
make the motherboard functional.

Intel Core 2 Extreme, Intel Core 2 Quad, Intel Core 2 Duo Pentium EE, 

Pentium D, Pentium

Supports dual channel DDR2 533/667/800, 

Memory.

Supports up to 8 GBs DDR2 memory.

This motherboard supports 2-way SLI with two x16 PCI Express slots.

The power supply requirement is dependent upon the power and the number of the GPUs you 
install. If you are going to SLI two graphics cards, you are going to require more power. As a 
rule, for one GPU you need a minimum of a 350 W power supply. If you have two GPUs in an 
SLI configuration, you will need a minimum of a 500 W power supply. To calculate the power 
you are going to require for your specific configuration, go to www.slizone.com.

These instructions tell you how to install each of the parts listed so you can have a functioning 
motherboard. As you go through the installation instructions, we are assuming you have pur-
chased the necessary parts.

Intentions of the Kit

This kit provides you with the motherboard and all connecting cables necessary to install the moth-
erboard into a PC case. If you are 

building a PC, you will use most of the cables provided in the kit. 

If however, you are replacing a motherboard, you will not need many of the cables.

When 

replacing a motherboard in a PC case, you will need to reinstall an operating system even 

though the current drives have an operating system.