Emerson MITX-430 Manuel D’Utilisation
Operation
MITX-430/MITX-440-DVI-2E Installation and Use Guide (6806800K37B)
77
No TPM Hardware
If no TPM is found.
TPM Enabled Status
Show TPM status, Enabled or Disabled
TPM Active Status
Show current state of the TPM, Activated or Deactivated.
TPM Owner Status
Show current TPM Ownership state, Owned or UnOwned.
Table 5-7 S5 RTC Wake Setting
Field
Description
Wake system with Fixed
time
time
Enable or disable system wake on alarm event. When enabled, system
wakes on the specified hr::min::sec.
Default value is Disabled.
wakes on the specified hr::min::sec.
Default value is Disabled.
Wake up hour
Select 0-23, for example, enter 3 for 3AM and 15 for 3PM.
Default value is 0.
Default value is 0.
Wake up minute
0-59. Default value is 0.
Wake up second
0-59. Default value is 0.
Wake system with
Dynamic time
Dynamic time
Enable or disable system wake on alarm event. When enabled, system
wakes on the current time + Increase minute(s). Default value is
Disabled
wakes on the current time + Increase minute(s). Default value is
Disabled
.
Wake up minute increase
1-5. Default value is 1.
Table 5-8 CPU Configuration
Field
Description
Processor Type
EMT64
EMT64
Processor Speed
Processor speed
System Bus Speed
System bus speed
Table 5-6 Trusted Computing (continued)
Field
Description