Epson S1C62 Family Manuel D’Utilisation
EVALUATION BOARD S5U1C62XXXE
S1C62 FAMILY
EPSON
VII-3
DEVELOPMENT TOOL REFERENCE MANUAL
4
NAMES AND FUNCTIONS OF PARTS
This section describes the names and functions of the parts of the S5U1C62xxxE.
4.1 Basic Functions
The S5U1C62xxxE has the following basic functions:
■
Program execution (Run function)
Install the EPROM containing the application program and execute the program.
■
Single-step program operation (Single-step function)
Programs may be run instruction by instruction to check the internal state of the CPU as it changes with
each instruction.
each instruction.
■
Program execution suspension at a given address (Break function)
A breakpoint may be set at an address at which it is desired to suspend program execution. After
execution has stopped at the breakpoint, it can be restarted with the program run function.
execution has stopped at the breakpoint, it can be restarted with the program run function.
■
Displaying program addresses and instruction codes during a break
Program addresses and instruction codes may be displayed on the LED indicators.
■
Displaying the contents of RAM, registers, and flags during a break
The contents of RAM, the A, B, X, and Y registers, the stack pointers, and the flags may be displayed on
the LED indicators during a break.
the LED indicators during a break.
■
Interface with ICE
The S5U1C62xxxE can interface with the ICE so that a higher level debugging environment may be
established.
established.
■
Setting hardware options by installing function option and segment option ROMs
Hardware options, i.e., I/O ports and segments, can be specified by writing option data for the func-
tions created by the function option generator and the segment option created by the segment option
generator into EPROM, and installing the EPROM.
tions created by the function option generator and the segment option created by the segment option
generator into EPROM, and installing the EPROM.
4.2 Operating Panel (Top view)
F5
F1
3210
876543210
BA9
076543210
321
076543210
321
876543210
BA9
876543210
BA9
876543210
BA9
76543210
CF
IFDFZF
0
321
0
321
PCB
BB
EN
BREAK POINT
RAM ADDRESS
SA
BP
BS
PCP
PCS
IR
RAM
X
SP
Y
B
A
F
RUN STEP
DIS
EVA62XX
E0C62XX EVALUATION BOARD
OFF ON
POWER
POWER
DC IN
5 V
5 V
FUSE
3 A
3 A
H
L
Position of pin 1
■
Switches and keys
•
EN/DIS switch
This switch enables or disables the setting of
breakpoints. When the switch is in the EN
(Enable) position, the setting of breakpoints is
enabled. When it is in the DIS (Disable)
position, the setting of breakpoints is
disabled. Normally, set the switch to the DIS
position.
breakpoints. When the switch is in the EN
(Enable) position, the setting of breakpoints is
enabled. When it is in the DIS (Disable)
position, the setting of breakpoints is
disabled. Normally, set the switch to the DIS
position.
Fig. 4.2.1 Operating panel