EVGA 121-BL-E756 Manuel D’Utilisation

 

 

 

17 

 

Preparing the Motherboard 

Installing the CPU 

Be very careful when handling the CPU. Hold the processor only by the edges 
and do not touch the bottom of the processor.  

Use the following procedure to install the 
CPU onto the motherboard: 

Unhook the socket lever by pushing down and 

 from the socket.  

Put your finger on the tail of the load plate 

and press down with light pressure to lift 
the load plate up.  

Lift the load plate. There is a protective socket 

cover within the CPU socket to protect 
the socket when there is no CPU installed.  

Remove the protective socket cover from the 

CPU Socket.  

 

 

Note:  Remove the process from its protective cover, making sure you hold it 

only by the edges. It is a good idea to save the cover so that whenever 
you remove the CPU you have a safe place to store it.