Omron C200HE Manuel D’Utilisation

Note Input 000 for the second and third operands when using replacement instruc-

tions.

C is not one of the allowed values.

In the following example, IEMS(––) changes the destination for 

DM to EM

bank 1 and uses indirect addressing to move #1234 into EM 0001 in EM bank 1.

MOV

#1234

D0000

IEMS3

#EOBI

00000

1234

0001

DM0000

EM0000

0001

@EMBC(––)

N

N: Bank number

IR, SR, AR, DM, HR, LR, #

EMBC(––)

N

N must be 0000, 0001, or 0002 and the bank number specified by N must exist in
the CPU Unit.

When executed with an ON execution condition, EMBC(––) changes the current
EM bank to the specified bank number. The CPU Unit can access only the cur-
rent bank, which is indicated in bits 00 through 07 of DM 6031.

An error will occur and EMBC(––) won’t be executed if the specified bank num-
ber doesn’t exist in the CPU Unit.

Indirectly addressed DM word is non-existent. (Content of 

DM word is

not BCD, or the DM area boundary has been exceeded.)

The specified bank number, N, doesn’t exist in the CPU Unit.

In the following example, EMBC(––) changes the current bank to bank number 2
when IR 00000 is ON.

EMBC

#0002

@EMBC

#1005

00000

00001