Omron C200HE Manuel D’Utilisation

This operation is used to read or change the function codes assigned to expan-
sion instructions. There are 18 function codes that can be assigned to expansion
instructions: 17, 18, 19, 47, 48, 60 to 69, and 87 to 89. More than one function
code can be assigned to an expansion instruction.

Note Function Code Assignments can be read in any mode, but can be changed in

PROGRAM mode only.

The function code assignments become possible only when the DIP switch pin 1
is OFF and pin 4 is ON.

00000

INST TBL  READ  
 FUN17:ASFT

INST TBL  READ  
 FUN18:SCAN

00000

Press EXT to begin displaying function
code assignments.

Press CLR to bring up the initial
display.

Press the Up and Down Arrow keys to
scroll through the function code
assignments.

The Up Arrow key displays function
codes in ascending order:
17, 18, ... , 89, 17, 18, ...

The Down Arrow key displays function
codes in descending order:
17, 89, 88, ... 17, 89, ...

INST TBL  READ  
 FUN17:ASFT

Press CLR to return to the initial
display.

INST TBL   CHG? 
 FUN18:SCAN

→

????

INST TBL  READ  
 FUN18:SCAN

INST TBL   CHG? 
 FUN18:SCAN

→

MCMP

INST TBL   CHG? 
 FUN18:SCAN

→

PID

INST TBL  READ  
 FUN18:PID

Press CHG to change the displayed
function code assignment.

Press WRITE to enter the change into
memory.

Press the Up and Down Arrow keys to
scroll through the instructions.