Omron C200HX Manuel D’Utilisation

When the execution condition is OFF, MOVB(82) is not executed. When the
execution condition is ON, MOVB(82) copies the specified bit of S to the speci-
fied bit in D. The bits in S and D are specified by Bi. The rightmost two digits of Bi
designate the source bit; the leftmost two bits designate the destination bit.

1

Bi

1

2

0

Source bit (00 to 15)

Destination bit (00 to 15)

0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 1

Bit 
15

Bit 
00

0 1 0 1 0 1 0 0 0 1 1 1 0 0 0 1

0 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1

1

2

0

1

Bit 
15

Bit 
15

Bit 
00

Bit 
00

LSB

MSB

C is not BCD, or it is specifying a non-existent bit (i.e., bit specification
must be between 00 and 15).

Indirectly addressed DM word is non-existent. (Content of 

DM word is

not BCD, or the DM area boundary has been exceeded.)

ON if the leftmost bit of the content of word D is 1, otherwise OFF.

S: Source word

IR, SR, AR, DM, HR, TC, LR, #

Di: Digit designator (BCD)

IR, SR, AR, DM, HR, TC, LR, #

D: Destination word

IR, SR, AR, DM, HR, TC, LR

MOVD(83)

S

Di

D

@MOVD(83)

S

Di

D

The rightmost three digits of Di must each be between 0 and 3.

When the execution condition is OFF, MOVD(83) is not executed. When the
execution condition is ON, MOVD(83) copies the content of the specified digit(s)
in S to the specified digit(s) in D. Up to four digits can be transferred at one time.
The first digit to be copied, the number of digits to be copied, and the first digit to
receive the copy are designated in Di as shown below. Digits from S will be co-
pied to consecutive digits in D starting from the designated first digit and contin-
ued for the designated number of digits. If the last digit is reached in either S or D,
further digits are used starting back at digit 0.

First digit in S (0 to 3)

Number of digits (0 to 3)

0: 1 digit
1: 2 digits
2: 3 digits
3: 4 digits

First digit in D (0 to 3)

Not used.

Digit number:

3 2 1 0