Advantech PCA-6185 Manuel D’Utilisation

Page de 114
PCA-6185 User’s Manual
36
3.4.4 Virus Warning
If enabled, a warning message and alarm beep activates if someone 
attempts to write here. The commands are “Enabled” or “Disabled.”
3.4.5 Hyper-Threading Technology
"Enabled" for the Hyper-Threading optimized OS, when used with Intel 
Pentium 4 CPU with Hyper-Threading technology such as 3.06 GHz.
3.4.6 Quick Power On Self Test
Allows the system to skip certain tests while booting.  This will decrease 
the time needed to boot the system.
3.4.7 Boot Up NumLock Status
 This feature selects the “power on” state for NumLock. The commands 
are “Enabled” or “Disabled.”
3.4.8 Typematic Rate Setting
The typematic rate is the rate key strokes repeat as determined by the key-
board controller. The commands are “Enabled” or “Disabled.” Enabling 
allows the typematic rate and delay to be selected.
3.4.9 Typematic Rate (Chars/Sec)
BIOS accepts the following input values (characters/second) for type-
matic rate: 6, 8, 10, 12, 15, 20, 24, 30.
3.4.10 Typematic Delay (msec)
Typematic delay is the time interval between the appearance of two con-
secutive characters, when holding down a key. The input values for this 
category are: 250, 500, 750, 1000 (msec). 
3.4.11 Security Option
This setting determines whether the system will boot up if the 
password is denied. Access to Setup is always limited.
System
The system will not boot, and access to Setup will be denied 
if the correct password is not entered at the prompt.
Setup
The system will boot, but access to Setup will be denied if 
the correct password is not entered at the prompt.
Note:
To disable security, select “PASSWORD SETTING” 
in the main menu. At this point, you will be asked to 
enter a password. Simply press <Enter> to disable 
security. When security is disabled, the system will 
boot, and you can enter Setup freely.