Apple 073-0560 Manuel D’Utilisation

Power Mac G4 SCSI Card -

Touch the metal PCI access covers on the back of the computer.

(Figure 1)

Important:

To avoid electrostatic discharge, always ground yourself by touching the

port access covers before you touch any parts or install any components inside the

computer. To avoid static electricity building back up in your body, do not walk

around the room until you have completed your installation and closed the computer.

Figure 1

Power Mac G4 Power Mac G4 (Mirrored Drive Doors)

Unplug the power cord.

Lift the latch on the right side access panel.

Gently lower the access panel until it lies flat. To avoid scratching the case, lower the

panel onto a soft, clean cloth.

Warning: If you see any lights glowing on the main logic board, the computer

has not been shut down. Close the side access panel and shut down the

computer before proceeding.