Toshiba MA-1650-4 Manuel D’Utilisation

EO1-11110

6-35

The “DISPLAY MESSAGE” here means the message to be displayed in the 16-digit dot windows of the Operator
Display panel (and Customer Display panel if the 16-digit dot windows are installed as hardware option) while the
Mode Lock of the terminal is in the “LOCK” position. This display message may be used as information,
commercial message, welcoming greeting, etc.

CONDITION

Any time outside a sale

OPERATION

Mode Lock:  SET

31  [@/FOR]

|Message Line No.|  [ST]

Character Entries  [ST]

6.18  DISPLAY MESSAGE PROGRAMMING  (Submode 31)

(1 to 4;  max. 4 lines)

*

(Max. 16 characters per
line. Regular-size only.)

Repeat for other lines.

* Allowed for sequential Line No. only

1. When the option “Store Message SCROLLING DISPLAY” is selected, four lines (Line Nos 1 to 4)

are available.  Even when the option “Store Message 16 CHARACTERS HELD” is selected, four
lines (Line Nos 1 to 4) are available.
In this case, refer to “Store Message Display” operation to display the respective message lines.

2. When the “SCROLLING DISPLAY” option is selected, a maximum of 64 characters can be

entered consecutively after designating Line No.1 at first and depressing [ST] for each line end.

3. The character must be regular-sized only.
4. The DISPLAY MESSAGE set here will also appear in the REG or MGR mode if so designated by

program option.

ex.)   To program the following display message under the “SCROLLING DISPLAY” option:

Line No. 1

Line No. 2

Line No. 3

Line No. 4