Q-Logic 8200 Manuel D’Utilisation

6–iSCSI Noninteractive Commands

-stat (Display Port Statistics)

SN0054667-00  C

6-25

To view the port statistics for the specified adapter, issue the -stat command as 

follows:

-stat <hba_port_inst> 

To display adapter-level statistics, issue the -stathba command as follows:

-stathba <hba_port_inst>

To view the send targets, issue the -stdsp command as follows:

-stdsp <hba_port_inst>

To use the -stdsp command, you must first issue the -stadd command at least 

once to add a send target for discovery only. For more information, see 

.

To use the -stdsp, -strd, and -strem commands, you must first issue 

the -stadd command at least once to add a send target for discovery only 

(no target login). After using the -stadd command to add at least one send 

target for discovery only, then you can use the -stdsp command to display all 
send targets for discovery, along with the appropriate index to be used for 
the -strd and -strem commands. The -strd command (with the target 

instance from the -stdsp command) must be used to perform the send 

target discovery to discover all target portals.
After a send target for discovery only has been added by means of the 
-stadd command and discovered by the -strd command, or the iSNS 

has been configured (with a valid iSNS server), a list of targets and target 
portals is discovered.  When you issue the -dtdsp command, the 

discovered target portals are displayed. The displayed discovered target 
portals are not logged into targets at this time, but are local to the 
QConvergeConsole CLI and are available for login. To log a discovered 
target portal into a target, issue the -dtli command. To log all discovered 

target portals into targets, issue the -dtlia command. To remove 

discovered target portals from the list, issue the -dtrem command.