Q-Logic 8200 Manuel D’Utilisation

8–NIC Interactive Commands
NIC Port Setting Configuration

8-8

SN0054667-00  C

2. Adapter Configuration1. CNA Configuration2. NIC Port Setting Configuration<port selection>
1. Display Configured Port Settings

From the Port Settings Menu, select the Display Configured Port Settings 
option to view the configure port parameters. For example:

IPv4_Checksum_Offload_Enable        : RxTx
Jumbo_Frames_MTU_9000_Enable        : off
LOCAL_Administered_Address_MAC      : 00:0e:1e:04:d3:34
Port_Alias                          : None
Port_Wake_On_LAN_Option             : Disabled
Port_PXE_Enable                     : off
Flow_Control                        : Rx Tx Enabled
Max_Jumbo_Buffers                   : 1024
Receive_Buffer_Count                : 4096
Transmit_Buffer_Count               : 1024

2. Adapter Configuration1. CNA Configuration2. NIC Port Setting Configuration<port selection>
2. Configure Port Settings

From the Port Settings Menu, select the Configure Port Settings option to 
configure port parameters. For example:

IPv4_Checksum_Offload_Enable (off, Rx, Tx, RxTx)[RxTx]:
Jumbo_Frames_MTU_9000_Enable (on, off)[off]:
WOL available options:
 0 = Disabled,
 1 = Wake on Magic Frame,
Port_Wake_On_LAN_Option [Disabled]:
Port_PXE_Enable (on, off)[off]:
Flow_Control (Rx, RxTx)[Rx Tx Enabled]:
Max_Jumbo_Buffers (128, 256, 512, 1024)[1024]:
Receive_Buffer_Size (1024, 2048, 4096, 8192)[4096]:
Transmit_Buffer_Size (128, 256, 512, 1024)[1024]:

2. Adapter Configuration1. CNA Configuration2. NIC Port Setting Configuration<port selection>
3. Change Port Alias Name

From the Port Settings Menu, select the Change Port Alias Name option to 
change the port alias. For example:

Port_Alias [None]: port_alias
Successfully saved Port Alias