Q-Logic 8200 Manuel D’Utilisation
10–Converged Network Adapter Interactive Commands
Loopback Test
Loopback Test
10-116
SN0054667-00 C
Configure Test Parameters
6. Loopback Test<port selection>2. FCoE3. Configure Test Parameters
From the Loopback Test menu, select the Configure Test Parameters option to
open a loopback test submenu with options to configure the data patterns, data
size, number of tests, test increments, error handling, and loopback type. For
details about these parameters, refer to
open a loopback test submenu with options to configure the data patterns, data
size, number of tests, test increments, error handling, and loopback type. For
details about these parameters, refer to
For example:
Loopback Test
=======================================================
CNA : 1 Port: 2
SN : AFE1028C03899
ENode MacAddr : 00:0E:1E:04:95:EF
CNA Model : QLE8242
CNA Desc. : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
FW Version :
WWPN : 21-00-00-0E-1E-04-95-EF
WWNN : 20-00-00-0E-1E-04-95-EF
Link : SFP not installed
=======================================================
1: Data Patterns
2: Data Size
3: Number Of Test(s)
4: Test Increment(s)
5: Abort On Error
6: Loopback Type
CNA : 1 Port: 2
SN : AFE1028C03899
ENode MacAddr : 00:0E:1E:04:95:EF
CNA Model : QLE8242
CNA Desc. : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
FW Version :
WWPN : 21-00-00-0E-1E-04-95-EF
WWNN : 20-00-00-0E-1E-04-95-EF
Link : SFP not installed
=======================================================
1: Data Patterns
2: Data Size
3: Number Of Test(s)
4: Test Increment(s)
5: Abort On Error
6: Loopback Type
Start Diagnostics Test
6. Loopback Test<port selection>2. FCoE4. Start Diagnostics Test
From the Loopback Test menu, select the Start Diagnostics Test option to start
the loopback test.
the loopback test.
iSCSI
4. Adapter Diagnostics1. Converged Network Adapter1. CNA Model6. Loopback Test<port selection>3. iSCSI
This option is currently not supported.